Florida Classifieds

[FLKustom]

Here is a Seadoo Classic! at least their price is realistic (obo)

http://fortmyers.craigslist.org/lee/boa/3173992699.html


can someone tell me why there is a bar on the top at the back of the trailer?

either way, kudos for having big beefy tires!

 

[nammer]

i emailed them to call me, and no call

 

[nammer]

El Toro, probably.

Those 4 skis on trailer came up here too. I think it came up already.
May be we should add scams too? Namer??

I think you're giving me ideas to fund my projects, i should list mine up for $300 and say to send me a $50 deposit to hold it

on another note, i put down a small deposit for those 2 gsx's and double trailer, gonna pick it up saturday on my way to tampa, one motor is apart, she said the other one ran when they parked it 2, i'm just gonna take my chances, trailer looks mint, both have titles

 

[nammer]

Here is a Seadoo Classic! at least their price is realistic (obo)

http://fortmyers.craigslist.org/lee/boa/3173992699.html


can someone tell me why there is a bar on the top at the back of the trailer?

either way, kudos for having big beefy tires!

i have no idea, maybe the sides are those parking/backup poles with the lights, and the top is rectangle for a license plate

 

[Matt Braley]

Congrats on the GSX's Nam. Look up Group K and what they say about and do with the 97 GSX.

 

[El Toro 33809]

I think you're giving me ideas to fund my projects, i should list mine up for $300 and say to send me a $50 deposit to hold it

on another note, i put down a small deposit for those 2 gsx's and double trailer, gonna pick it up saturday on my way to tampa, one motor is apart, she said the other one ran when they parked it 2, i'm just gonna take my chances, trailer looks mint, both have titles

Where's the link to the GSX's you are getting? Are they in Zephyrhills? I took a look at a pair there a couple weeks ago. Not sure they were GSX'S though.

 

[nammer]

Congrats on the GSX's Nam. Look up Group K and what they say about and do with the 97 GSX.

thanks, this group k?


http://www.groupk.com/docssd.htm

 

[Seadoobuddy]

i have no idea, maybe the sides are those parking/backup poles with the lights, and the top is rectangle for a license plate

whatever the reason I would think it must be removed before the ski can slide off the trailer....doesn't look as it there is enough clearance to make it under the bars.

 

[ocod]

thanks

You got something?

Edit: NV I saw you said left deposit. Have to look back to see ad.

 

[Spimothy Leary]

Congrats on the GSX's Nam. Look up Group K and what they say about and do with the 97 GSX.

thanks, this group k?


http://www.groupk.com/docssd.htm

we gotta get him actually running first.... before he starts modding with group k tips

 

[Matt Braley]

I know Spimy, very true, just trying to get him pumped up.

 

[nammer]

we gotta get him actually running first.... before he starts modding with group k tips

haha, yea i was hoping it would give me step by step instructions on how to replace an engine, and btw, i think i'm gonna need to post up pics, but I can't even get the carb off my spi

and yea ocod, i just left a $50 deposit, and gonna pick them up on saturday, one ski hit the other though, so near the fuel selector has some cracks, but she said it didn't go all the way through, but that one was the one with the motor apart though

 

[nammer]

Where's the link to the GSX's you are getting? Are they in Zephyrhills? I took a look at a pair there a couple weeks ago. Not sure they were GSX'S though.

hey el toro, these are them, they are in florahome, which is about 30 min from gainesville

http://jacksonville.craigslist.org/boa/3161072741.html

 

[ocod]

Yup.
I would jump on those.
Figure you sell one with trailer and you'll have money w/free ski.

 

[nammer]

she was even negotiable on the price but i'm just hoping one runs, she seemed really nice and honest, she said they cleaned the carbs before they let the ski sit 2 years ago, skiis have covers and sitting in a garage, but yea hopefully i get rid of one once i get all the good parts on the other one

 

[nammer]

i was hoping someone, or multiple people could give me their input on how to get this 96 spi 587 carb out, not sure which screws to remove and also how do I unhook the choke cable (I thought it needed an allen key, but none of mine fit, maybe I just don't have the right size, if u guys know, could you tell me. thanks!

 

[ocod]

Can't really sead picture.
but I remember you need 10 or 12 mm open end wrench to undo nuts on either side of base to intake

For the choke it a small metric Allen hex. Metal rod slides out.

http://fiche.seadoowarehouse.com/se...ype=13&make=seadoopwc&A=208&B=21&modelid=1996


Pn# 45 on pic of single intake

 

[nammer]

thanks, yea i couldn't see the photo either, cause I screen shot the photo, do you mean the 4 big bolts that the plate attaches to, one of them is like impossible to get to, i read about people buying harbor freight wrenches and bending them, any other recommendations on what to use?

 

[nammer]

thanks for the diagram ocod, yea that's what I figured I needed to stick it in, my allen wrenches are standard, so i needa pick up some metric ones, i get so frustrated with machines, good thing I don't do this for a living.

 

[ocod]

Hey link I put takes you to wrong picture.
go oil pump aSsembly on left tabs and look at single intake.
It shows two threaded rods and nuts hold carb down.
pn#45

 

[nammer]

Hey link I put takes you to wrong picture.
go oil pump aSsembly on left tabs and look at single intake.
It shows two threaded rods and nuts hold carb down.
pn#45

it's cool, yea i know that hexagon thing, that attaches to the choke, I just prob need diff allen wrenches

 

[ocod]

it's cool, yea i know that hexagon thing, that attaches to the choke, I just prob need diff allen wrenches

No, you asked how to get carb off?. That's what I'm trying to tell you how.
Its held on by two bolts to intake.

If you go to link it links you to wrong diagraphm. Go on tabs on the left to oil pump assembly.
it will show how carb attaches to intake.

I think that what you asked too??




The choke cable rod goes through hexagon thing and is held by small metric allen screw.

 

[nammer]

oh, yea i asked both, i thought the diagram pn45 was the choke, so i thought u were revising that, ok i'll check on the tab, I attached a bigger pic, thinking I highlighted what I needed to get off the 4, but I'll relook at the pic if u say there are only 2

i appreciate your time and help!

 

[ocod]

Yup, I don't know why it's doing that.
but go to link but go to oil pump assembly in blue on the left side of page.
then look at pn#45. It will be the 10 or 12 mm nut.


http://fiche.seadoowarehouse.com/se...asp?Type=18&make=seadoopwc&A=208&B=9&Action=O

 

[nammer]

ok, i see what you're talkin bout, now my ignorant q where is that on the pictures i added?