• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Forum Members Unite! Orlando Area December Ride?

Status
Not open for further replies.
It's gonna take me at least eight hours one way. I need to change the same 6 cd's that have been back there in the changer for like two years! I also need to find out why my XP800 is mis-firing up top now.

I think I may be causing rectifier/regulators to go out from not pulling a lead when I charge batteries!?! It is only missing when it warms up.
 
Since I don't know crap about these lakes, I'm hoping to get there early enough on Friday to maybe take a spin thru a few of them just to scout things out... has anybody been on this lake chain before ?
 
Matt Braley said:
It's gonna take me at least eight hours one way. I need to change the same 6 cd's that have been back there in the changer for like two years! I also need to find out why my XP800 is mis-firing up top now.

I think I may be causing rectifier/regulators to go out from not pulling a lead when I charge batteries!?! It is only missing when it warms up.
Click to expand...

is it like bouncing the revs almost like the rev limiter is lower?
 
Matt Braley said:
Glad to have you back safe Nam! Were gonna have some fun. Let me know if there is any little odds and ends that I can bring that may improve your skis.
Click to expand...

hey matt, to take you up on this, if you happen to have any of these parts, it would greatly be appreciated, a rave valve spring, just the spring for a 1996 gsx, and the attachment that goes to the tilt on the same 96 gsx (pictured)


and my question on carbs are does this attachment on my index finger just snap off? It looks like it does, but I don't wanta break it, I tend the break things :(

also does anybody need any random things from a 94 xp, things like gas tank, oil tank, front and rear tow hooks, random nuts and bolts... if anybody wants any of that stuff it's free as well
 

Attachments

  • CIMG6973.JPG
    CIMG6973.JPG
    953 KB · Views: 8
  • CIMG6974.JPG
    CIMG6974.JPG
    799.8 KB · Views: 11
  • CIMG6981.jpg
    CIMG6981.jpg
    229.5 KB · Views: 14
Last edited by a moderator:
just take it nice and slow...it will pop right off.

I have those parts if Matt Doesnt have them; If I ship today you'll have them in plenty of time.
 
Minnetonka4me said:
just take it nice and slow...it will pop right off.

I have those parts if Matt Doesnt have them; If I ship today you'll have them in plenty of time.
Click to expand...

cool thanks minnetonka4me, I'm in no rush, it won't be for the meet, it's the one i'm workin on, how much did you want for those 2 parts?
 
$20 shipped for both...if you have anymore small stuff you need there would be plenty of room in the bubble mailer.
 
My XP800 just misses once every couple of seconds at WOT. I have had rectifiers fail me a lot and so far it's not missing that bad. I still hope that is what it is. I'm gonna have to take an afternoon off (in addition to taking Fri off). I have my race skis to ride for the first time too. Maybe I'll just load one of those if it feels good. Or maybe I'll just grab a complete greybox with key and rear black box for the road...I don't know.

Nam I do have those parts laying around but hate to cost Minne a sale, especially when he is being so reasonable about it.
 
ok I have one question about the buoy course. are we gonna make people wear helmets or no I know I always wear mine i have a extra but if no one else is gonna wear them i wont bring it. also my girlfriend said she will course marshall just in case someone falls off
 
Its all you matt...The GSX are longer than XPs though.

Matt...keep it simple. Try new plugs. Clip the wires back. You never know till you try it.
 
I did put new plugs in, I've clipped the wires back recently. I can see the TTO blip with the miss so I feel like it's behind the plug leads somewhere. It didn't start until a rode it for 10 minutes. If it's not the rectifier then it should be the coil.
 
Ok bottom of the coil/grounds clean, make sure the connectors are too. The warming up thing sounds pickup related but who knows.

One other thing off the top of my head...the connector on top of the rear ebox. make sure those pins are nice and clean too.
 
Minnetonka4me said:
Ok bottom of the coil/grounds clean, make sure the connectors are too. The warming up thing sounds pickup related but who knows.

One other thing off the top of my head...the connector on top of the rear ebox. make sure those pins are nice and clean too.
Click to expand...

Will do, thanks for the thoughts. I have those GSX trim rods cause I bought a couple cheap to get the 787's out of them. Nam bring whatever hardware you think you won't need and well trade.
 
[video=youtube_share;UjOCvXV0T2s]http://youtu.be/UjOCvXV0T2s[/video]

behind the 951 twin piped hx on my b-day I need to figue out how to get the water to bead off the goPro and stop it from fogging up
 
put Rain-x on a rag nice and heavy and let it sit on the lens overnight. Do it a couple times right away, then redo once a month.
 
racerxxx said:
Can't we get a live feed!!!!!!!!!!!!!!! I can't wait to hear/read/watch.
Click to expand...

i wish that would be badd ass you can live feed if your close enough but the range is like 500ft outside its good for setting up the camera angle and thats about it lol
 
Status
Not open for further replies.

Similar threads

Matt Braley
  • Locked
Members Unite!! 2016 Fall Florida Ride
28 29 30
Replies
731
Views
46,156
WhiskeyD
WhiskeyD
Matt Braley
  • Locked
Members Unite!! Lake Norman NC Ride May 20-21
25 26 27
Replies
674
Views
49,467
WhiskeyD
WhiskeyD
A
  • Locked
Bought a '06 Challenger today on ebay, Take a look...oh and Hi SeaDooForum members
Replies
14
Views
2,516
Brian J
Brian J
Matt Braley
  • Locked
RESTO My Rocketship Racing HX
Replies
14
Views
8,128
Matt Braley
Matt Braley
phroadrick
  • Locked
Great ride today and had help washing the boat
Replies
1
Views
1,200
thor7000
T
Back
Top