The rebirth of the RXX

[1of500]

2 in the hull I guess they wanted to go for a ride. I saw the webs and knew what they were from

 

[1of500]

hahahahaha yes I noticed the chipotle.. yea man, when you've got things to do, its quick, easy, good, and cheap....except at 8pm on a Tuesday... you'll wait 45 min, and then by the time you get up to the glass, they'll be out of chicken!

Longest I've waited at the one here is 5 minutes they are never packed just steady

 

[1of500]

Resonator delete

 

[1of500]

One down

 

[1of500]

 

[1of500]

new pisser for cooling tray

 

[Matt Braley]

You will hate those things eventually. A left turn wets a right leg.

 

[1of500]

I know but I would rather deal with that and know about an issue as soon as it happens

 

[1of500]

Mock up done had an issue with the throttle cable bracket had to go to the rear carb

 

[racerxxx]

Pull the starter and paint it better please (I see rust on the long case screw)and also paint the carb clamps. Put the boot screws in a cordless drill and get the dam chipped silver paint off them with a wire brush or something.

 

[1of500]

I have a brand new starter coming it would have to be blasted for paint to stick

 

[racerxxx]

I have a brand new starter coming it would have to be blasted for paint to stick

Wipe it with acetone and your legit to paint

 

[1of500]

I'd rather go with a new one I got to thinking about how much of a pain it would be to swap a starter with the twin pipes

 

[DAGRE147]

Like looking up Yasmine Bleaths skirt!

 

[1of500]

Relocation of the bildge pump

 

[mikidymac]

Is it already snowing in Georgia?

 

[1of500]

Yep fiberglass snow

 

[1of500]

I removed the fuel tank to clean it out and clean under it while I wait on the last few things to come in.

 

[1of500]

 

[pwgsx]

Relocation of the bildge pump

Remove that white sticker

 

[1of500]

Resonator delete complete

 

[jhjesse]

So tired of looking at pics of the inside of your hull. Finish the damn thing and go ride. I wanna see pics of this thing tearing it up at the lake. LOL...good job.

 

[96spxpos]

lol is that a "Jelly Nugg" I see? Usually I see two, one for each ride plate screw. Racer knows ALLLLLL about them Jelly Nuggs:rofl::coolgleam:


And, is that throttle cable bent/crimped? that happened to my choke cable, where the threads just started fraying, one after another...

Looking clean and fresh Bro-han VanDerSloot!

 

[1of500]

Only one intake grate bolt on this model

 

[1of500]

The cable goes to the oil pump but I'm going premix