• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Reliability & common issues with the 1996 SPi / 587 in general

Status
Not open for further replies.

smokinu454

New Member
Hey guys, first time poster here. I have been out of the PWC world for quite some time. We spend most weekends on the pontoon and we have been thinking of adding a PWC to the mix. I suspect that the family may lose interest so I am starting with something cheap. Im going to look at a 1996 Spi that appears to be in pretty good shape. The guy says it has no issues, runs good, compression is 135psi on both cylinders, and is offering a water test ride. Its been a while but I seem to remember that skis from this year range with the 587 were pretty reliable in general. What specifics do you advise I look at to make sure Im not buying someone else's problem?
 
Double check compression (~150psi new), make sure carbs are rebuilt, no grey fuel lines, and lake test it. Those are super simple skis, reliable but not fast.
 
Thanks for the info! I will keep those in mind when I look at it today. Yea I know they arent super fast, From what Ive read 40-45mph?
 
You’ve most likely figured it out by now…but yes your speed is accurate. I’m 170lb, & I get 43mph using a handheld Garmin GPS.
mine has only 135 psi on both jugs. They are loads of fun because they’re a fairly ropy machine, but do not handle tw “heavier” people, & are useless for travelling anywhere if there is even a small swell, the short length results in continuous porpoise.
 
If you get a moment do a review on the different models, each has their own benefits and weaknesses, Make sure the SPI has the characteristics you like when riding around...
 
Status
Not open for further replies.
Back
Top