95 sea doo xp carb question

[HERTENSTEIN83]

I have a 95 sea doo xp and was wondering if some one could help me identify the high speed and low speed setting screws and how many turns out they should be thanks

 

[bike818]

high and low settings

if the carbs are clean and just want to start off with something that will run use the following settings: adjuster with the t-bar 1 full turn out. adjuster with the splined end 3/4 turn out. hope this helps

 

[Dr Honda]

if the carbs are clean and just want to start off with something that will run use the following settings: adjuster with the t-bar 1 full turn out. adjuster with the splined end 3/4 turn out. hope this helps

NO!

Per the book on a 95 XP... 1-3/4 on the low ( by the throttle shaft) and 0 on the high.

 

[timmyboy76]

I have a 95 sea doo xp and was wondering if some one could help me identify the high speed and low speed setting screws and how many turns out they should be thanks

why you messing with it?