2000 speedster with merc 240 hp 6cyl stator 6 pin harness

[scooter240]

i am looking for the harness i believe for the stator..it sits under the stator and is a 6 pin(3/3 stacked not 6 pins in a row)...mine it totally corroded and looking up under stator i can see exposed wire at that connector also so dont want to just repair the one side..does anyone know the part number or where i can find a new or used harness/connector??

Any help is much appreciated..ty

 

[Tim75]

i am looking for the harness i believe for the stator..it sits under the stator and is a 6 pin(3/3 stacked not 6 pins in a row)...mine it totally corroded and looking up under stator i can see exposed wire at that connector also so dont want to just repair the one side..does anyone know the part number or where i can find a new or used harness/connector??

Any help is much appreciated..ty

Stator connector.
Have you checked the resistance of the 3 pairs? They should all be the same.
Back to the connector.
I believe it is a type called “Metri-pac”. Many types on Amazon. You will need the special crimper, too.
If you have crumbled insulation, (as the old OEM units were known to do) you need to replace the stator. Amazon or eBay.

 

[scooter240]

just came in from garage, further up wiring i found part number taped to it...it is actually the trigger housing, i have now ordered one...ty for the response..i will follow up when i replace...ty