• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

RXT 260 no power up

Status
Not open for further replies.
i have no power to gauges or starter button.cleaned all grounds,checked all fuses,load tested battery,checked start switch,checked dess post and switch,cleaned all terminal connections,and inspected harness.have not tested continuity on harness wiring, or 30 amp breaker in witch idk how to check.could this breaker stop power to gauges?should i have any power on both sides of fuse panel or just one side until key powers up?
 
Sounds like a bad ground or no power to the fuse box
You can check with a volt meter between battery negative and the 30 Amp fuse contacts
 
Status
Not open for further replies.
Back
Top