P0326 - Knock sensor...been replaced 3 times

[basejumper]

Hi guys, new here...

My ski has had the knock sensor replaced 3 times in the last 5 years and yesterday the darn error code came up again.

Nowhere locally to me will touch jetski's, and the one place I found said 3 month wait.

I am tempted to leave the fault code there, as it hasn't affected the ski's performance at all.

Thoughts please.

Thanks in advance!

 

[Digdog]

It could be the wiring to it that's the problem , check for strained or bad connections or wires. What code is it giving out?

 

[basejumper]

It could be the wiring to it that's the problem , check for strained or bad connections or wires. What code is it giving out?

P0326 - I checked all the wires I could see next to the battery (and battery terminals) and they all look ok. I'm going to take it out again today and see at what point exactly it occurs. ​

ps. no idea why the above is larger font

 

[Digdog]

There specific ohms readings for the wiring harness , the connectors could be bad, even at the computer , sometimes the wire is damaged inside , if you need the sheets I can send you a copy.

 

[basejumper]

There specific ohms readings for the wiring harness , the connectors could be bad, even at the computer , sometimes the wire is damaged inside , if you need the sheets I can send you a copy.

Thanks for that bud, thats really helpful. I'll check today if its 5,000 RPM it comes on at, I think it is.