• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Long beep after two “ready to start” beeps

Status
Not open for further replies.

ffraankk8

New Member
After my last ride I heard one beep after about 30 minutes of riding. I thought nothing of it and kept riding, then about 10 minutes later my ski shut off. Wouldn’t start back up, only cranked over. I figured I might have over hearted so I sat on the water for a little then it started up but only ran for 30 seconds then died again. Eventually I got it back to shore and home and when I went to start it in my drive way a couple days later I noticed an extra beep after the initial 2 starting beeps when I inserted the key. Never heard this beep before and don’t know what it means.
1) Anyone know what the beep was when I was on the water that I ignored
2) what is the extra beep when I insert my key
Thanks
* I also don’t have a working gauge so I can’t read any info on it like temperatures and stuff
2006 seadoo gti se
 
Extra beep could be low voltage or communication error with the cluster. If your cluster isn't working or failing that most likely is your problem.
 
Status
Not open for further replies.
Back
Top