Recently purchased a seadoo xp as a project. When purchased i was informed the ski wasnt running and had lost power to gauges when riding. Got it home amd installed fresh battery and had 2 beeps with vts but no guages and wouldnt turn over. Jumped solenoid and found engine seized. Lubed up the cylinders and turn engine over easy by hand to free it. Jumped solenoid and turned over great. Checked all connections at mpem and dess post as well as fuses. Evryrhing appears to be working but still wont turn over and no gauges. Any help would be appreciated thank.
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
97 seadoo xp wont start has 2 beeps but no gauges besides vts
- Thread starter zac
- Start date
- Status
Relay Issue
If your cranking, getting spark then yes the start relay connect wires needs to be diagnosed for location, then operability.
When this receives a signal, its internal piston rises to connect your two red cables. It may be corroded/frozen, or polarity reversed.
Bills86e
If your cranking, getting spark then yes the start relay connect wires needs to be diagnosed for location, then operability.
When this receives a signal, its internal piston rises to connect your two red cables. It may be corroded/frozen, or polarity reversed.
Bills86e
Last edited by a moderator:
- Status
Similar threads
