2005 gti rfi

[RetiredSSG]

Good morning everyone. I just purchased a 2005 GTI RFI. I cannot find much information about this PWC. Was it not a popular model? It seems to be in decent condition however I need to replace the start/stop button and the housing for the button as well. I've been searching all over the net but can't seem to find the right one. Also what other wear parts should I consider replacing besides spark plugs? Most of the parts website don't have phone numbers where I can talk to a live person. Thanks in advance.

 

[jons68]

There are plenty of housing with the switch on ebay and new switches. As far as other parts to look at replacing, check your wear ring clearance on the jet drive. Check the bellows boot and carbon ring on shaft. Just make sure the carbon ring is snug against support ring. Look at fuel lines and make sure they arent grey. If they are replace them.

 

[RetiredSSG]

Thank you for the reply. I found and ordered the housing but finding new switch for my year and model has been challenging. I'm going to check my wear ring this weekend and order one if need be. It looks like the previous owner already changed the fuel lines. Thanks again for the advice.

 

[mikidymac]

No need to replace fuel lines on the injected skis. I would verify correct injection oil. Replace injection oil and small 3/32" oil lines and change pump oil.