2000 Seadoo rx

[Mickirig1]

I would replace stuff just due to age. Better to spend a little now then big money later.

 

[southernboy94]

These are the crank seals I need correct? And how many? 2?

 

[mikidymac]

I wouldn't buy cheap no name crank seals like that. As much of a pain as they are get the best you can.
Best is OEM.
Second WSM
Third SBT.
In my opinion.

 

[southernboy94]

Ten4 I'm not necessarily ordering those just making sure they were the correct part...I'll look for the part number on the parts manual first and look on osdparts

 

[southernboy94]

Are these what I'm looking for? #5- oil seals?

 

[mikidymac]

Yes. That's them.

 

[southernboy94]

Thanks that's what had me confused since they weren't labeled crank seals

 

[southernboy94]

Maybe I can get all my parts and get it put back together this weekend

 

[southernboy94]

Osdparts doesn't have anything i need but the starter drive assembly lol....

 

[mikidymac]

Make sure you get case sealant. ThreeBond 1211 or 1194. Also Yamabond or Hondabond is the same thing.

 

[mikidymac]

Is yours a carb or DI ski?

 

[southernboy94]

Okay will do and it's a carbed ski

 

[mikidymac]

You can get the complete WSM gasket kit with seals on Amazon for $84. WSM 007-624-05.

 

[southernboy94]

Okay cool...need your professional opinion on this one...should I replace all the gaskets since I have it apart? The only ones I have to replace are the exhaust manifold gaskets since one ripped when pulling it apart, other than that the others were fine

 

[mikidymac]

You can't reuse any of them. Head, base gasket, carbs or exhaust.

 

[southernboy94]

Didn't know that...thank you for that lol I guess my buddy was gonna pretty much let me half ass put it back together. Well cool thanks for all the info man you've been a great help...I'll start ordering parts then

 

[southernboy94]

I believe that is all I need is the gasket kit and starter drive assembly other than a few bolts I'll try to match up at tsc or some other hardware store if they don't have them

 

[mikidymac]

Make sure to only use stainless hardware

 

[southernboy94]

Yessir I knew that one lol

 

[mikidymac]

Also make sure to put the correct counter balancer oil in once you have it back together.

 

[southernboy94]

Which would be?

 

[southernboy94]

Or where would I find that out? Service manual?

 

[mikidymac]

Yes the manual. The 951 uses standard 30w motor oil. Not a multi weight. Autozone carries it.

 

[southernboy94]

Cool man thanks I was curious as why there was regular oil in the case when we split it