• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1995 Gtx

Status
Not open for further replies.

oldski

New Member
Can anyone help me with a no spark problem? The modules fuses are good, the lanyard switch is working, the ground is good, the stator tests to 60 ohms, and the module is within spec on all ohm tests. I am at a loss here. TIA.
 
Welcometothe seadoo forum oldski. Check the ground wires in the box with the coils. There is 3 wires...2 go to the coils 1 goes to a grounding spot. Make sure it gets a good ground.
Keep us posted.

Karl
 
I finally got around to checking the ground in the box and that was where the problem was. You're the man Karl! Thanks.
 
Status
Not open for further replies.
Back
Top