Search results

Head gasket

Check battery connections at terminal, check to make sure plugs in tight and locked on ecu, check your relay

You can try all of those things like checking the connections, battery level, fuses ect but I’m sure the unit is just failing. As I said before, check those bushings and everything else before you move forward with a new ibr If you check around online and you will see they had problems with...

Before buying a new one change out the white bushings and the other bushings where the bolts slide thru and give it a shot. If it still does it, most likely you need a replacement. Last year mine was around $1200 It’s easy to install There’s some vids on YouTube u can find to help. Good...

The motor was fine in the ibr. It was the computer board inside the unit that was failing.

The IBr was just faulty. Unfortunately There was no fix. Ended up buying a new one and installed it myself. Brought it to the dealer to flash the new ibr and everything works perfect

All set. Replaced head gasket n ran it for a few days and coolant in bottle is good to go. That head gasket was brand new according to previous owner who rebuilt the motor. Either way I replaced it and also used the ARP bolts. Way better than the oem’s that we’re in there. Now on to next...

Yup. Have one already. Thnks. Leak down test was done correctly with TDC on each cylinder but didn’t see anything coming up from coolant bottle. About 20% leak Just a quick ?, other than head gasket, what else would make the coolant rise and come out of the overflow tube during WOT or...

Thnks Digdog. Yeah hate to admit it but the guy who just rebuilt it before I took ownership either used existing head bolts or didn’t install correctly. Goin to have to tear her down and put in an oem gasket & amp head bolts.

Pressure test done. Held at 13 psi Did a ride test today with the seat off and noticed coolant tank rising to the point of coolant bubbling right out the vent tube into the bilge to the point of 5-10 min, bottle is empty. Motor was just rebuilt so less than 1 hour on it. Going to do a...

Anyone else have any suggestions? Having same issue on 12 RXP x. Checked everything but think it’s one of the ride plate fitting but can’t seem to actually see it come out during hose test.

Anyone have same issue and found problem?

Check plugs, injectors or plug caps

Hello everyone, Need some help If anyone has some answers, 2012 RXP x ibr issue. Went to put ski in water ran it for a bit then ibr light came on along with engine light. Did my research on this site along with others. I can manual override ibr to move up or down in any position so I know...

Looking for head bolts for 01 RXDI I sent you a PM Thanks

my 01 rxdi has 200hours. Had same problem with piston, tore down sent heads to Fullbore and $375 later, all is good. The pieces of your piston or ring most likely went out the exhaust, hopefully not down in the lower portion. Find out why your piston or ring went before you rebuild and hit...