-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
cylinder specs
- Thread starter NIL8er
- Start date
- Status
NIL8er
Active Member
Do you think this will solve the problem?. I hope so.
NIL8er
Active Member
I guess i should have read every word. Oh well lesson learned. Where else could it be comming from.
How did you know water was getting in there? What did you torque the head to? What sequence did you torque the head in? Is the head on the right way? Yes, it's can go on 2 ways but only one is right. Does the o-ring looked pinched? How did you clean the old gaskets off, what tool? Post good hi res non blurry pics, please.
I mentioned before about how you need the manual, I wasn't kidding. This isn't elementary school where there is no engine left behind, a play on the no child left behind. If they didn't want you too read every word in the manual they would have just printed every other word. I mean come on, you're putting hard earned money into this, put your heart and soul into it. Ok, rant over, now get to figuring out the issue.
Sent from my SGH-T889 using Tapatalk
I mentioned before about how you need the manual, I wasn't kidding. This isn't elementary school where there is no engine left behind, a play on the no child left behind. If they didn't want you too read every word in the manual they would have just printed every other word. I mean come on, you're putting hard earned money into this, put your heart and soul into it. Ok, rant over, now get to figuring out the issue.
Sent from my SGH-T889 using Tapatalk
NIL8er
Active Member
I have the manual. Read where I thought was important. Torque sequence as manual recommended. Only an idiot could put head on wrong based on 2 hoses or one hose, and fitment. Any other suggestions. Whereit could be comming from . and from the front only and its a lot of water in a short time.
NIL8er
Active Member
How do I know it has water in it??? Front stops fireing with water hooked up and in lake. Pulled plugs and a lot of water shoots out front only.
NIL8er
Active Member
What should I be looking for exactly.
Wheatfield83
New Member
Cracks, bad gaskets.
Sent from my XT1254 using Tapatalk
Sent from my XT1254 using Tapatalk
Read the last 3 sentences of the first paragraph. I'm doing my best here to stay composed but I'm starting to unravel. I'm beginning to think you're not even reading every word I type. An answer to every question would be great.
Sent from my SGH-T889 using Tapatalk
IDoSeaDoo
Well-Known Member
Was this the thread where you had too tall of a base gasket? If so, this could be your opportunity to tear it back apart and get the right base gasket as well as find your leak. If you've pulled the head and it looked okay (you didn't see an odd spot on the head gasket o-ring where water was intruding) then your problem is either on the bottom or is cracked somewhere. The next time I'm in my storage area, I'm going to take a good hard look and think about where it could possibly come from.
I have deleted many of the last posts. I did not go through them to determine good info or bad info. I removed them for the mere fact that the language and attitude are simply not acceptable.
If you have GOOD and LEGIT info within a post I deleted, please repost it.
The attitude within this thread ends here. I have not locked the thread as it is our desire for others to help others.
Some posts that were not offensive were deleted as well as they would not have made sense without the other posts. If these were your posts, I did not delete them to "edit" you, I did so for the integrity of the thread..
Sent from my iPhone using Tapatalk
If you have GOOD and LEGIT info within a post I deleted, please repost it.
The attitude within this thread ends here. I have not locked the thread as it is our desire for others to help others.
Some posts that were not offensive were deleted as well as they would not have made sense without the other posts. If these were your posts, I did not delete them to "edit" you, I did so for the integrity of the thread..
Sent from my iPhone using Tapatalk
Last edited by a moderator:
I will not get into the "right and wrong" within the post. I deleted all that was not post related once. I will delete the two most recent posts AGAIN.
I am TRYING to leave this post open in hopes that it helps the members of the site.
So,,, this is it. No more attitude, no more poor quality words.
Again,, I have thoughts as to who is out of line just like all others that have read this thread. But,,, that is not the intent behind the thread.
NO MORE !!!
Next step will be a temporary ban so the "jets can be cooled,,,"
Sent from my iPhone using Tapatalk
I am TRYING to leave this post open in hopes that it helps the members of the site.
So,,, this is it. No more attitude, no more poor quality words.
Again,, I have thoughts as to who is out of line just like all others that have read this thread. But,,, that is not the intent behind the thread.
NO MORE !!!
Next step will be a temporary ban so the "jets can be cooled,,,"
Sent from my iPhone using Tapatalk
Last edited by a moderator:
NIL8er
Active Member
If you don't want adult messages then dont get in adults business. Now you pulling a jerk move , lying trying to get me banned like child. If your the example here then I want nothing to do with this group any way. You trying to stir the pot by continuing with your pms , butt out. And you'll have no more problems with me. As a matter of fact I'm done with your nonsense. Grow up.
- Status
