• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Trailer Help!

Status
Not open for further replies.

nesnfred

Member
I’m on vacation with our 2008 230 Wake Edition and after launching boat and getting the trailer back to the house I noticed the two rear swivel brackets for the bunks were severely rusted. The bunks were also a few years old so I had a local shop replace the bunks and all 4 swivel brackets. But I don’t remember the bunks extending as far back as the new ones are. Could someone take a measurement for me for comparison? My bunks extend 26 inches past the rear swivel brackets and 16 inches past the front swivel brackets. With the rear ones, I also measured how far they extend past the end of the trailer (measured from rear lights) and that is 10 inches. The bunk boards are 11.5 feet in length. Any help would be appreciated! Our trailer is the stock black painted Karavan. I’m suspicious they mounted the bunks backwards…thinking the 16 inches past swivel should be in the rear and the 26 inches past swivel at the front?
 
Last edited:
Someone sent me a pic (attached) so looks like mine were mounted correctly. I’m pulling the boat out tonight so I’ll know for sure then.
 

Attachments

  • 92D54D61-FEFC-4A9E-8FA3-21520769354F.jpeg
    92D54D61-FEFC-4A9E-8FA3-21520769354F.jpeg
    401.5 KB · Views: 25
Status
Not open for further replies.
Back
Top