• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Too far gone?

GTXVern

New Member
2000 Seadoo RTX 787 RFI 5515

Is a corroded engine something I can rebuild? Sandblast the case and buy a rebuild kit? The rest of ski is in good cosmetic shape. Just got the engine out tonight and got a glimse of the inside. I'm going to keep tearing it down and I'll post some more pictures. Looking for options. This is something I would like to learn how to work on and keep long term if it is worth it. I am not sentimentally attached to it.

This is my first time working on a ski but have some mechanical experience.

Thanks. - Josh
 

Attachments

  • IMG_20250405_194715_868.jpg
    IMG_20250405_194715_868.jpg
    707.1 KB · Views: 11
  • IMG_20250405_194729_924.jpg
    IMG_20250405_194729_924.jpg
    868.5 KB · Views: 10
  • IMG_20250405_194734_098.jpg
    IMG_20250405_194734_098.jpg
    774.7 KB · Views: 9
  • IMG_20250405_194741_690.jpg
    IMG_20250405_194741_690.jpg
    755.7 KB · Views: 9
Got the head off. The pistons are stuck in the cylinders but the cylinder bolts came out a lot easier than the head. I broke quite a few of those and had to weld on some nuts to the flush cracked bolts to try to extract them. I need to get a flywheel puller and try to get the bottom end apart.
 

Attachments

  • IMG_20250406_112940_532.jpg
    IMG_20250406_112940_532.jpg
    971.6 KB · Views: 6
  • IMG_20250406_112954_151.jpg
    IMG_20250406_112954_151.jpg
    822.3 KB · Views: 6
  • IMG_20250406_112945_901.jpg
    IMG_20250406_112945_901.jpg
    921.2 KB · Views: 6
  • IMG_20250406_113007_716.jpg
    IMG_20250406_113007_716.jpg
    886.2 KB · Views: 7
Salt Turd.
If it was mine I would find a clean core and rebuild.
Thanks for getting back to me. Looking for parts now. Do you know if any year 787 rfi will work?

I'll get the flywheel puller mid week to get the bottom end apart. I ended up just curting the rods off since the bottom case might be usuable with some cleanup plus I wanted to get some practice working on a worst case scenario. The cylinder castings were trashed. The injector service said they could refurbish these if they weren't shorted.
 

Attachments

  • IMG_20250406_145351_601.jpg
    IMG_20250406_145351_601.jpg
    919.8 KB · Views: 2
  • IMG_20250406_155724_062.jpg
    IMG_20250406_155724_062.jpg
    535.8 KB · Views: 2
Back
Top