• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Strange intermittent beeps after about a half hour of use

Status
Not open for further replies.

shelley603

Member
2006 speedster 200 scic starts beeping after about a half hour of use while running ,everthing works fine and nothing lights up but I bring it in because I'm scared and don't want to get stuck on the water with a boat that is trying to tell me something but what I'm not sure..Any suggestions? Thanks
 
2006 speedster 200 scic starts beeping after about a half hour of use while running ,everthing works fine and nothing lights up but I bring it in because I'm scared and don't want to get stuck on the water with a boat that is trying to tell me something but what I'm not sure..Any suggestions? Thanks
After reading some post on this site it's definitely a voltage issue I was reading12.4 volts and started machine and it dropped closer to 12 volts so I'm not getting any charge voltage ..,I checked all fuses and nothing is blown so I'm not sure how to determine why I'm not getting charge voltage which causes machine to beep after 30 minutes of usage ....Does anyone have any ideas to help?
 
Been there, done that, twice! Yup, two motors, same here... If it helps, I was getting beeps, randomly, usually at the end of the day, on the way in. Hooked it up to CanDoo and found a bad rectifier on the port side. The only way to really know, is to hook it up and check for codes. Rectifier's aren't cheap and the stator is not something easy to fix.
 
Status
Not open for further replies.
Back
Top