Started installing my Seadek.............

[gb387]

That will be a huge help. I can forward this to them. I only want the swim platform.

 

[kernal]

FYI,
I'm working with JetBoatPilot on the cockpit kit to verify that it will cover the snaps from the SE carpet kit. I know JPass also worked with them. I have sent templates for the Transat Seat Pads as well, going to replace them with the Dual Density SeaDek.

JPass how was the fit of the swim deck kit?

 

[Mighty Peace]

Nice job. Looks great!!! We just recently purchased a 2012 210SP for our family that has 44 hours on it, and will definitely want to do this upgrade- maybe next year. Kids want tubes and wakeboards and this and that...haha.

GOing to keep watching comments on the Seadek and HydroTuff installs.

 

[JPass]

JPass how was the fit of the swim deck kit?

Awesome, although I believe the height of the Seadek interferes with the Transat Seating. I tried it once, but didn't sit on it.

 

[gb387]

Jpass..... After doing some looking, Looks like it will interfere with transat seats. My plan is not getting the two narrow strips where the main portion of the transat seat rests. But the remaining portion of the rear deck as well as the two steps on the engine hatch. I am curious about the part in the bow area, I see the anchor hatch cover in the drawing but no part for the bow seat area or middle step in area in the bow between the floor and anchor hatch. Was that custom for you?

Thanks jpass you have been a huge help!!

Also anyone know of a group buy and or coupons for seadek?

 

[JPass]

I am curious about the part in the bow area, I see the anchor hatch cover in the drawing but no part for the bow seat area or middle step in area in the bow between the floor and anchor hatch. Was that custom for you?

Thanks jpass you have been a huge help!!

Also anyone know of a group buy and or coupons for seadek?

The kit was purchased through Jetboatpilot in a group buy last September. His kit did not have the full transom like the factory Seadek kit offered. So I basically ordered the kit through JBP and had them add the missing pieces for the transom.

I understand the bow step/cushion piece you mentioned for the front. I'm a little confused about the piece between the floor and the ski locker. Are you referring to the open bow floor from the ski locker forward? That piece was in both company's diagram.

It's my understanding that JBP offers a yearly Seadek group buy in September. If I were you, I'd reach out to them about the kit and what pieces you'd like. Feel free to reference my boat and purchase. I'm sure they'll remember it. My name is John Passarella if you need it for reference when talking to them.

Let me know if you need more help with this.

 

[gb387]

Seadek ordered.... Kind of want the teak but gray seems like a happy medium for myself and wife... Should look really good!!