Sensor fault no start

[JohnGringo]

Hi. I own an RXT 215 and I started up 5 day ago for check, after it was parked for 6 months.
It started well and run in idle for 5 minutes waiting to leave for vacations.
Today we reach our destination and trying to started up I get the 2 bips then a message "sensor" and maint after 4 secs.
I can hear the fuel pump dut nothing else. Dead.
How do I read the fault code.
5 times set button?

Any clue.
Thanks.

 

[dcm0123]

From the downloadable factory service manual-

NOTE: Fault codes, the letter P — followed by 4
digits (P-1234), can be displayed in the informa-
tion center for troubleshooting. With safety lan-
yard on its post, press 5 times the SET button to
start the display of P-codes (onboard diagnostic).
Press MODE to scroll codes if more than one is
present. When the “list” is over, END will appear.
When END appears, press MODE to exit

 

[JohnGringo]

Dcm 0123 apreciated Thanks.
I receive a code P-1656 or P1676 as far as I was able to read as after that end appears and now the fault is gone

 

[JohnGringo]

Problem fixed.
I found a dealer nearby.
It was the key.
He programed a new one as the old was not working properly and that is why it pop up fault codes.
Yeah, I am going to the beach.