• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Seadoo Rxx carb

Status
Not open for further replies.

joe.paradise.14

New Member
Anyone know any info about the 2001 rXx carb. With the jet, spring , needle and seat on what the sizes are . Trying to replace everything inside the carbs but I can't find any info on them
Thanks Guys
 
[MENTION=51824]Matt Braley[/MENTION] had the specs, I think [MENTION=73220]1of500[/MENTION] does too
 
55.jpg

I just found this but says nothing about the spring
 
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
From experience and reading of MANY issues. I would NOT replace the pop off spring if yours is not damaged. Seems to create issues for most.
 
Mag carb.- 2.0 needle and seat. Main jet 177.5 Pilot jet 75

PTO Carb.- 2.0 needle and seat. 172.5 Main jet and 75 pilot
 
[MENTION=57920]racerxxx[/MENTION] thanks man I will ask you and [MENTION=43374]Coastiejoe[/MENTION] so should I replace everything but the spring ?
 
Keep the spring, I replace the soft parts and needle and seat when I rebuild my carbs. Use genuine mikuni rebuild kits.
 
Sorry was picking up another 95 xp800 looks like you have it under control I have a set of the oem rxx carbs I will part with lmk
 
Status
Not open for further replies.
Back
Top