Seadoo rxt 255 2008 oil leak

Status
Not open for further replies.

KarimZWD

New Member
Hey, can you please help me, I have an oil leak in the hold. I disconnected everything and took the motor out, but I can't find anything anywhere. I think it's the shaft bearing, but I'm not 100% sure.

Do you have any tips for me that I can check? otherwise it works really well. But with the oil problem I don't dare to go on the water with it anymore.
 
Well, almost all oil leaks don't require the engine to be removed and finding the oil leak requires you to run it. I'd put the motor back in and do the analysis the right way. Most oil leaks are the driveshaft bushing and can easily be changed in less than hour for around $40 but you need to run it on the hose after you get it clean and then use tissues under it and test for leaks after a couple minutes on the hose. The next most common leak is the oil cooler and can also be easily changed with the engine in and again tissues under the engine will tell you if that is the leak.
 
Status
Not open for further replies.
Back
Top