Scupper Valve

[kevinld]

I have a 1997 Challenger, can anybody tell me an easy replacement for the Scupper Valve(Where and what to ask for). The thru hole valve that drains the deck, my understanding is they all go bad and I can see why after removing, bad design on Seadoo's part.
Thanks,
KD

 

[scooper77515]

West marine sells the ball scupper for about $15.

 

[Dr Honda]

I just put one of these on my boat. I don't get a single drop coming back in the hull. ($7 shipped)


http://cgi.ebay.com/ebaymotors/MARI...LM%2BLA&otn=5&ps=63&clkid=8124292802888961851

 

[kevinld]

Thanks for your reply's, I've ordered both the the Ball valve and the Flapper type, we'll report on which we like best.
Kevinld

 

[scooper77515]

Not sure which the 97 challenger came with from the factory, but mine had the ball type when i bought it.

 

[chansman43]

I just put one of these on my boat. I don't get a single drop coming back in the hull. ($7 shipped)


http://cgi.ebay.com/ebaymotors/MARI...LM%2BLA&otn=5&ps=63&clkid=8124292802888961851

Hey Doc,
I've got a 96 Speedster. Will this check valve work on my boat as well?

 

[Dr Honda]

Hey Doc,
I've got a 96 Speedster. Will this check valve work on my boat as well?

yes it will.

 

[voodoo]

When I got my 97 it also had a ball type, and it works fine, I read somewhere the flap can be turned over if it gets curled too far.

 

[TJ198]

Noob question, what valve are we talking about here?

 

[Dr Honda]

Noob question, what valve are we talking about here?

It's the valve that drains the water from the passenger compartment... but doesn't let water back in.