Putting In Jet Pump Siphon Tubes

[alindley]

Hey, sorry for the multiple posts but this is extremely important as im going to the cottage today, after a day of tryna rip out the old siphon tubes, i finally got them out... But putting in the 2 new ones seems to be impossible.

Im gonna buy a new jet pump if I cant do this before 6, does anyone have a trick to putting these in? I have tried bashing it numberous times (rubbed end of a screw driver/hammer tryna pound em in) and have got noooowhere

reeeeally need some advice

 

[Dr Honda]

If it's just the tubes in the rear... they just push in.

Post a pic, if it's something else.

 

[Coastiejoe]

Hey, sorry for the multiple posts but this is extremely important as im going to the cottage today, after a day of tryna rip out the old siphon tubes, i finally got them out... But putting in the 2 new ones seems to be impossible.

Im gonna buy a new jet pump if I cant do this before 6, does anyone have a trick to putting these in? I have tried bashing it numberous times (rubbed end of a screw driver/hammer tryna pound em in) and have got noooowhere

reeeeally need some advice

I pulled the manual for your ski and there is nothing in there pertaining to the tubes..

I tried...

I'm thinking this answer needs to come from a been there don't that member...

 

[bmocken]

Take a dowel or a square piece of wood that is a little bigger than the siphon tube. Tap the wood with a hammer to push the tubes into place. I just did it this way last week an it worked fine for me.

 

[manolocross]

Take the nozzle off and it will be easier to manage! I did it and just tapped them I'm with a peice of wood.

 

[donkey]

mine were sloppy loose n I had to use ultra copper to hold the tubes in.3skis,all loose