Parting out 96 XP Superstock

[LegalizeIt]

I bought it new in 96 and raced it for five years.
Last time out was 5 years ago to Lake Elsinore. Ran strong with no issues.
Capable of consistent 65 MPH runs with extra-deep grate.

Too many parts to list, I'd rather take and post some pics.

Some of the parts: Stage 1 Miller motor, Buckshot Billet carbs and head w/3 sets of domes, Factory Spec 1 pipe, Skat Trak Magnum pump w/3 cones, lever actuated drop nozzle, Westcoast trim tabs, Jet-Dynamics extra-deep grate, UMI steering (old type), Renthal bars, etc...

Needs battery.

Also have a single Zieman trailer and beach tote.
And lots of race spares; will make a list later.

This is a feeler post, just checking for interest. I'm into sportbikes and track days now, so the XP has been in storage for 5 years...

Might consider parting it out.

 

[abie_lah]

how much and your location plss

 

[LegalizeIt]

I'm in Southern California; asking $2500 for the XP without the extra parts (trailer, tote, race spares, etc...).

I'll post some recent pictures soon.

Thanks

 

[BLK MAJK]

I'm in Southern California; asking $2500 for the XP without the extra parts (trailer, tote, race spares, etc...).

Here's a pic from 1998:
View attachment 2572

I'll post some recent pictures soon.

Thanks

Some good parts there...let me know if you decide to part it out, I could use some goodies for my 96 XP

 

[LegalizeIt]

Here's some pics:










It's a great practice or back-up racer for anyone that qualified for the World Finals...

 

[LegalizeIt]

Price reduced to $2000 for the XP or take it all for $2500...

 

[abie_lah]

can u chek for send to malaysia,, serios buyer here,,

 

[LegalizeIt]

Not sure who ships there. I can deliver to Los Angeles harbor if you find a shipping company.

I had a sportbike shipped from Conneticut to Los Angeles last year. Cost me $735 plus $100 for insurance. But that was air freight...

The World Finals are coming up in 7 weeks, anyone qualify from Malaysia?
I know the Phillipine team will be there. It would be much easier and cheaper to ship it back with them. Just a thought...

 

[LegalizeIt]

Here's some of the spares that comes with the XP.
43cc domes for 180# compression (pump gas)
35cc domes for 220# (110 octane)
I have a set of 39cc in the head for 200# and 100 octane gas.
The 2 extra cones for the Skat Trak magnum pump. Also, extra hardware for the pump...

 

[LegalizeIt]

OK. As mush as it hurts me to do this, I think it's time to part it out.
I would rather see her get a new home, but...

Skat Trak Magnum pump with 16/24 custom swirl and R&D nozzles.
Comes with 3 different cones and extra new impeller shaft. $500 plus shipping

Factory Spec1 with exhaust maniflod; both have been Extrude-honed. $500 plus shipping

Buckshot Billet carbs with air screens. $400 plus shipping

Buckshot head with 3 sets of domes. $200 plus shipping

UMI steering with Renthal bars. $150 plus shipping

Jet Dynamycs deep intake grate. $100 plus shipping

Will list more parts later.
Just ask if you need pictures or prices.

Thanks all...

 

[d!face]

whats included with the steering?

 

[LegalizeIt]

whats included with the steering?

120 for UMI steering
30 for Renthal bars with grips
30 for finger throttle with modified cable
The last item will make the install much easier

Also 50 for lever and nozzle drop system

All prices are not including shipping...

You can see the parts in the pictures above...

Just let me know what you need...

 

[LegalizeIt]

The drop nozzle cable and actuator can be seen in this picture.

Here's the first year the XP made it to the Finals in 1996...

 

[semperfish]

Nice ski

Too bad I don't live in SD anymore, I would jump on it, but now I live in FL, plenty to choose from here. Good luck with the sale.

 

[LegalizeIt]

Thanks Fish.
I've had a lot of podium finishes with her, and would like her to find a good home and get the attention she deserves...

Anyways, I'm including all the plumbing for the Factory pipe, and will throw in the Sea-Strainer filter, the modified waterbox, and the exhaust hoses. It's a full exhaust system at $500...


Wescoast trim plates 70 + shipping
Custom sponsons 70 + shipping


Miller Stage 1 short block $800


D!face,
I can let the whole thing go for $200 plus shipping.
That's the UMI steering, Renthal bars, finger throttle with cable, steering cable, lever-actuated trim system, and all required hardware...

 

[d!face]

the nossle drop system is for the trim right? very interested

 

[93mustang97sea]

Thanks Fish.
I've had a lot of podium finishes with her, and would like her to find a good home and get the attention she deserves...

Anyways, I'm including all the plumbing for the Factory pipe, and will throw in the Sea-Strainer filter, the modified waterbox, and the exhaust hoses. It's a full exhaust system at $500...


Wescoast trim plates 70 + shipping
Custom sponsons 70 + shipping


Miller Stage 1 short block $800


D!face,
I can let the whole thing go for $200 plus shipping.
That's the UMI steering, Renthal bars, finger throttle with cable, steering cable, lever-actuated trim system, and all required hardware...

Make a deal with me on the trim plates and intake grate and ill see what i can do..

 

[d!face]

Can you get a pic of the throttle lever? I want to see if its similar to the one I have.

 

[96ROSSIERGSX]

I also might be interested in the drop nozzle system. Will it work on a 96 GSX?

 

[LegalizeIt]

Make a deal with me on the trim plates and intake grate and ill see what i can do..

160 shipped usps priority (2-3 days)

 

[LegalizeIt]

Can you get a pic of the throttle lever? I want to see if its similar to the one I have.

You can see it in the 1st and 2nd pic in post #5...

It's included in the deal I'm giving you.
Also that deal is only for you since I already commited.

Seems like I under-priced the UMI steering.
The new price is 150 + shipping...

 

[LegalizeIt]

I also might be interested in the drop nozzle system. Will it work on a 96 GSX?

It should.

Check out 3rd pic of post #10; it has plenty of slack.
It includes the lever.

$50 plus shipping...

 

[LegalizeIt]

Price reduced:

Exhaust deal - 400
Billet carbs - 300
Pump deal -400
Short block - 700
Buckshot head - 170
Electrical system - 200

Prices do not include shipping.

Let me know if you need any other prices or pictures...

Also, if you find any of these listed for less, I might be able to work something out...

Thanks
:cheers:

 

[LegalizeIt]

I can't send PMs but can receive them...

93mustang97sea
I only used the center tab in slalom competition.
It slows the ski too much; makes it too "wet".

 

[d!face]

Thanks Fish.
I've had a lot of podium finishes with her, and would like her to find a good home and get the attention she deserves...

Anyways, I'm including all the plumbing for the Factory pipe, and will throw in the Sea-Strainer filter, the modified waterbox, and the exhaust hoses. It's a full exhaust system at $500...


Wescoast trim plates 70 + shipping
Custom sponsons 70 + shipping


Miller Stage 1 short block $800


D!face,
I can let the whole thing go for $200 plus shipping.
That's the UMI steering, Renthal bars, finger throttle with cable, steering cable, lever-actuated trim system, and all required hardware...

ok ill take it all if you can do 225 shipped with the gaskets from your other post? im paypal ready so lmk asap!