Oil Tank Sending Unit Grommet

[mikidymac]

Does anybody know the part number for the oil tanks level sending unit grommet? It is a separate part but I can't find the number in any of the parts diagrams as they just show the entire sending unit.
I have a bout 4 that work fine but the grommet has gotten so loose over the years they pop back out of the tanks.

Thanks.

 

[Coastiejoe]

Did you check here?
http://www.seadoowarehouse.com/parts.php

 

[mikidymac]

Yes, and thank you Coastie.
I have tried all the 2-stroke microfilms and they just list the entire sending unit. I only want the grommet.

 

[jjsinaz]

OSD Has them. I bought two of them earlier this spring. Part number is 293720008 BTW, the same grommet fits both the outlet fitting and the sending unit.

 

[mikidymac]

Thanks JJ, I have the one for the outlet fitting and it looked too thick. I will take a second look tonight.

 

[jjsinaz]

I did have a he11 of a time getting the sending unit back in but it eventually went in and doesn't pop out or leak. Would probably have been easier if the oil tank was out.

 

[mikidymac]

You are probably correct. The only other part numbers I can find are for a 12mm and 9mm grommet which are way too small.