New here---- with problem ?

[grayt1964]

Have two 2006 GTI Se's PWC jet ski's, 135 hp 4 strokes with only 70 hrs, very clean and new like. Just got them out of garage from overwinter to start. One started , runs fine. THE other would not start and finally pulled spark plugs to check and have water on plugs. Spun over engine with all sparkplugs removed and all had fresh water spew from cylinders, (from hooking up water hose for cooling while on trailer). They were dry all winter so how does water get into all three cylinders on first season start up attempt???
I have rebuilt many small block chevys and don't know of a head gasket ever letting go on the whole bank??? I do not know marine engines in depth/ detail so is there something beside the head gasket it could be?? Is there another bottom end water seal ??? Please advise?

 

[Coastiejoe]

Did you or someone else winterized them?

When using the hose what order did you use? Water on it engine in first, then when stopping it, water off it engine off first?

 

[Coastiejoe]

The OP has started a 2nd post with the same content. Please go to the following link to provide an answer as this is the Meet and Greet forum.

http://www.seadooforum.com/showthre...all-three-cylinders-from-cooling-water-intake

 

[grayt1964]

Sorry for the duplication post, thanks for the advise / help in the other forum w/ answers.
I should have joined and been reading since last year. I just got these skis so my 3 teenage girls can love the water as much as I did growing up and still do! Appreciate kind/helpful and friendly responses. THANKS

 

[Coastiejoe]

No issues at all. Welcome aboard and thanks for joining. And I agree, joining and reading is the way to go. But we humans don't think like that. LOL


Sent from my iPhone using Tapatalk

 

[LouDoo]

I'm going to close this thread, since [MENTION=43374]Coastiejoe[/MENTION] has already posted a re-direct.

Lou