Mikuni Pop-Off pressure?

[Petron]

I recently rebuilt my Mikuni BN-401(SB) carbs (1996 Sea Doo GSX). The manual calls for pop-off pressure to range between 23-43 psi. My pressures were consistent with both carbs reading at 28 psi.

I know I'm within range but should I be concerned with my readings being on the lower end of 23-43 psi.?

Thanks

 

[timmyboy76]

Hey petron...what color spring you have in there now. if you have the 1.5n/s, then either black spring(80gm)=38psi, or short silver spring(65gm)=32psi.
..but you are in specs, so, know its b***h, with exhaust in way, have to crack back open and install different spring
..you can bend the tab down, fraction of c**t hair, and retest popoff..