• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Low voltage warning

Status
Not open for further replies.
Fixed it....

Ran a small 18 gauge wire with inline 20 amp fuse directly to the battery from side of rectifier that puts out DC....i have done everything I can and dealer has also...it's under warranty so I didn't care what they replaced...but all was a no go...
Here's some pics of what I did but it is a temporary set up...gotta heat shrink and etc....image.jpgimage.jpg
 
Last edited by a moderator:
Simple to use Lipoly low voltage alarm that is small and light for on board use, plug's into balance lead for detecting low voltage on individual cells. A loud alarm will sound and LED will change from Green to Red if any individual cell drops to 3.3v or below.

Spec.
Lipoly Range: 2s~4s
Size: 38x25x11mm
Weight: 7g
Voltage Accuracy: 0.03v
Low Voltage Alarm Threshold: 3.3v (per cell)




......................................
Mold removal in Delaware
 
Status
Not open for further replies.
Back
Top