Fogging cylinders walls

[Spoody6677]

Should I put some fogging oil in my my spark plug holes before starting, It's been 2 weeks since my rebuilt since my complete rebuild. I live here in Texas been 112 for 2 weeks and 90 on my garage. I did fog cylinders 2 weeks ago, but concerned about heat.

 

[Spoody6677]

Should I put some fogging oil in my my spark plug holes before starting, It's been 2 weeks since my rebuilt since my complete rebuild. I live here in Texas been 112 for 2 weeks and 90 on my garage. I did fog cylinders 2 weeks ago, but concerned about heat.

Sorry about Grammer fat fingers

 

[burtshaver2021]

As long as you added some 2 strike oil while rebuilding to the cylinder walls, wrist pins I would think you will be fine. If the machine is carbureted your should run 1 tank of pre mix along with the oil injection for break in. If you are worried and decide to add a squirt of oil in the plug hole before start up the worst that can happen is you foul a plug.