ocod
Well-Known Member
I'm been searching and think I found answer to why it gets hot but can't get engine to turn over.
I replaced negative terminal as it was was getting hot and had some glue that was burning off.
I removed pump to verify it wasn't binding
Engine turns freely over by hand w/no plugs.
Had battery on tender and comes back fully charged. Will take to get load tested.
Took starter out and confirmed it works but it gets HOT.
Hoping to find someone to let me borrow starter to confirm if its going bad before I shell out $$ for one or have it rebuilt??
Any other ideas as to why? or hands down starter is going bad.
It always had trouble cranking over but eventually would spin over initial hesitation.
I replaced negative terminal as it was was getting hot and had some glue that was burning off.
I removed pump to verify it wasn't binding
Engine turns freely over by hand w/no plugs.
Had battery on tender and comes back fully charged. Will take to get load tested.
Took starter out and confirmed it works but it gets HOT.
Hoping to find someone to let me borrow starter to confirm if its going bad before I shell out $$ for one or have it rebuilt??
Any other ideas as to why? or hands down starter is going bad.
It always had trouble cranking over but eventually would spin over initial hesitation.