DIY Seat/Upholstery Reconditoning

[simplewon]

Just finished mine also, got everything from http://www.seadooupholstery.com/

Looks like a new boat.

 

[moto17]

Nice job! ...i did my own! same boat!

 

[moto17]

I got mine from the same place! they rock! http://www.seadooupholstery.com/ My boat is on his page!

 

[Seadoobuddy]

Simple, who and what did 167 in a 50 MPH zone??????

BTW, nice looking seats

 

[Dalakian]

This may be a little offtopic, but does anyone know if these seat covers for XP are any good or are they cheaply made? http://www.watercraftsuperstore.net/PWC-Standard-Seat-Covers/108BT111-S.html

My stock seat is completely burned out from the sun and I would like to get it replaced.

 

[simplewon]

These seat covers are better quality than the oem sea-doo ones. As info.

 

[Dalakian]

Sweet. Thanks for the info. I feel safe buying them now.

 

[malesandro]

I just bought 96' Challenger without seats. I have to expoy all the existing holes because the person who ripped them out cracked the gelcoat. Would by chance provide me a picture of the back seat and your cut out dimensions of the vinyl? I will need to tackle the project just like yourself. I have Juki sewing machine with the required hardware to complete the job. Should I use marine grade wood as the base for each of the seats? What do you recommend?

 

[simplewon]

I would simply install new stainless flat head bolts going down from the seats into existing or new holes. It would make it an easier install. As far as pictures, you might check with http://www.seadooupholstery.com/

They have pics and video that might help.

 

[malesandro]

I will gladly pay you for the seat templates. Please give me a price.

 

[simplewon]

I will gladly pay you for the seat templates. Please give me a price.

You will need to contact http://www.seadooupholstery.com/ for info. I'm sure they will be happy to help. They were very helpful with mine.

 

[75sausage]

Sorry , the web site is
www.ball2ufall.com

Buyer beware.

I bought the 4 way stretch stuff from this guy. Everything came in as ordered but the quality of the vinyl is sub-par. The stuff is so flimsy, you can poke a hole in it with your finger. When I tried to return it I was unable to do so. Left 3 messages over a span of 3 weeks and got no response.

 

[Jetboater02]

Anyone know how to get the bow seat backs off on a 2005 Islandia? I have got to get my upholstery to copycatupholstery.com so I can redo my seats. Do I need to remove all of my cup holders or speakers to get to the screws? Someone? Anyone? :banghead:

 

[poetb]

Hello, Great job. I have a 97 challenger and want to do the seats also. What is the cost for the templates. (email at poetbruce@Verizon.net ) Thanks.

 

[ksherer07]

I am about to reupholster a 1998 seadoo challenger. the boat is white and green now. Any tips on where to buy the vinyl from and how much will I need?

 

[be_a_jayhawk]

I'm starting from the plastic. I'm more than willing to buy the precut and sewn parts, but is there any suggestions on the foam molds?

 

[hoosier]

A

 

[951 or bust.]

Hey everyone, looking for some guidance on my armrests I've completed all the rest of the interior myself over the winter months.

but having one heck of a time with the armrests as seen here.

 

[enut]

You can get that out, you need more heat, then with your fingers push the wrinkles towards the bottom of the seat.

 

[KyleW2]

What length staples do y'all prefer? 1/4? 3/8? Thanks!

 

[951 or bust.]

What length staples do y'all prefer? 1/4? 3/8? Thanks!

3/8 T50 staples with an air stapler is what I used.

 

[Bartoncraft]

Thanks Guns, definitely a lot of work but worth it. I have been busy this week. Sat I want to do the seat backs, then order more material for the armrests.

I am going to make a couple sets for this type of boat and put em on ebay, I figure there needs to be a few people looking for pre-made covers but dont want to sew them. The worst part by far is trying to trace out the formed factory covers onto a flat piece of material, so Im going to trace them onto some canvas paper for future use if anyone on the forum wants to do this and needs some help, I can mail the templates for a couple bucks. Feel free to ask any questions or add comments, suggestions, etc...

 

[Bartoncraft]

Do you still have the templates and could I get a set from you? Just tell me how much and I can venmo, chime, or PayPal. I can also send a check or cash