• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Compression?

Status
Not open for further replies.
Welcome to the seadoo forum kimsavage. I would adjust the low speed screw. Start at 1 1/2 turns and go from there. It adjust the low to mid rpm fuel range. The High Speed screw should always be set at "0", it shouldn't need any adjustment.

Karl

Karl
 
It sounds like you have a clogged carb. Pull them apart and clean them. Use Carb cleaner to clear all the passages.

Karl
 
Status
Not open for further replies.
Back
Top