Cleaning the hull

[lilskipp84]

From removing the plugs and purging out the fogging oil, I made a mess of the inside of the hull on a 1996 gtx....am I able to remove battery and hose down the motor and hull?...or are these not that water tight on the inside and I'll end up hurting the magneto and all?

 

[Seadoobuddy]

use simple green or Super clean.
I like SC better...Walmart has it for about $8 a gallon. Pour in 3-5 gallons of warm to hot water in the hull and some SC ...maybe 4 oz then drive around with it on the trailer then open the drain plugs and flush it with the hose. tilt the trailer if needed.

 

[lilskipp84]

Won't hurt any internals under the seat (motor, carbs, magento etc)...i got a nice mess inside there from some fogging and fuel spit out

 

[LouDoo]

Personally I do like SuperClean or PurplePower, pretty much the same thing. I like to spray in on then hose it off, much safer than having it slosh around, just leave it on for maybe 5 mins., and use a small brush if necessary. You can also do it a second time. Try to stay away from electrical components especially the starter.

Lou

 

[mikidymac]

Be careful with the SuperClean as I have had it discolor plastic parts and taken the shine off the seadoo engine paint.

 

[69boss]

Be careful with the SuperClean as I have had it discolor plastic parts and taken the shine off the seadoo engine paint.

Agree and it will remove pinstripes. One of those I will never do that again lessons.