Bilge pump, nav lights, and bilge fan not working

[Chuck3too3]

I just bought a 2004 seadoo sportster le. I got a pretty good deal on the boat so I was ok with a few minor problems. The bilge pump, nav lights and bilge fan arent working. When I turn then on the knobs dont even light up. I'm thinking this could be as simple as a one of the main fuses being blown. I havent had a chance to look at it yet. Anyone have any thoughts on this. I just cant see then all being bad.

 

[MB_Challenger]

i have a 2000 challenger and one of the fuses is for above listed items. check fuses before taking in to dealership.

 

[RFoster130]

Usually there is a wire from the battery that powers all of it. Check to make sure there isnt a small wire that isnt hooked up. on mine it goes to the positive side. I think i have heard of some that it needed to be a ground wire.

 

[MB_Challenger]

my 2000 challenger it is the neg or ground side.

 

[YUOnDaGround]

There is a fuse, check it.

 

[Lightningtruck]

I believe that the three items in question are all on the same circuit. Definately check the fuse. When I get home I'll grab the shop manual and look. I have the same boat as you (2004 Sportster LE).

 

[iggys6]

Did you ever fix this problem? I have the same problem on my 2000 seadoo challenger 2000

 

[Mazdarx]

On my 96 Challenger it was just a fuse that caused this problem. It was inside the grey box for the MPEM, but it wasn't on the circuit board with the others, it was on a wire that was just hanging in there.