• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Bilge pump 2006 Utopia

Status
Not open for further replies.

Stormin

New Member
Hi, I just purchased a 2006 Utopia and am having a great time with it at the lake. The bilge pump was working great at first but now will not work automatically. it does work with manual switch on dash. We tried to flush with a hose and I did remove a lot of debris. The question I have is. Is there a trick to remove pump? The dealer I called said it should come out with a twist and pull. It is in a very difficult location to reach. Also is the float switch attached to the pump? Thanks to any one who can help.
Are there free shop manuals available for down load? Thanks again
 
I replaced my auto switch yesterday, It was simple, the original had a rattling piece in it???!!!.....something failed....new one works like a charm....eBay.


Ned
 
Hi, I just purchased a 2006 Utopia and am having a great time with it at the lake. The bilge pump was working great at first but now will not work automatically. it does work with manual switch on dash. We tried to flush with a hose and I did remove a lot of debris. The question I have is. Is there a trick to remove pump? The dealer I called said it should come out with a twist and pull. It is in a very difficult location to reach. Also is the float switch attached to the pump? Thanks to any one who can help.
Are there free shop manuals available for down load? Thanks again

the auto part of the bilge is a constant live even when you isolate the power .there is a fuse near the battery for the auto bilge a 3 amp fuse ,it is proberbly blown.
 
Status
Not open for further replies.
Back
Top