Adjusting jet nozzle

[geauxeagles88]

Hi folks,
Just wondering if there anyone has a quick easy way to adjust the jet nozzle so that it lines up with the handlebars. Sort of "aligning" it. Currently when the nozzle is straight, the handlebars are turned slightly to the left. I'm hoping it's similar to adjusting my '96 GSX. Any input or advice? I don't want to bring it back to the dealer and lose a week for repair.
Thanks!

 

[Coastiejoe]

Yes. Minor adjustments are done at the nozzle. You should see it pretty easily if you take a look at the nozzle where it hooks to the steering cable.

 

[Spimothy Leary]

Hmmm, on mine it's up underneath where the cable meets the steering column. Two 10 mm wrenches to adjust.

 

[Coastiejoe]

You could be correct. I've seen it on the newer models. Just assumed,,,,

 

[geauxeagles88]

Just as an fyi on this... You really can't reach the adjustment nut at all because of the iBR gate being in the way. Apparently there is no way to move the gate up without hooking it up to the diagnostic computer. Brought it back to the dealer for the adjustment. It's pretty close now.

 

[Spimothy Leary]

If I remember there's a trick to bringing up the gate, I just can't remember how it works, we got stumped on that at the ramp a few months back with a buddy, but when he got home he figured it out, at the ramp we were baffled