• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

98 sporster doesn't start after running well

Status
Not open for further replies.

ricosaoco

New Member
My sporster single enging was out three time this sprin but the fourth time after getting a mille away just died on me, chenged spark plug, tank of gas is full, oil is half, batery is full but nothing the only thing that i cansee is that the sparks are not big just thin.. some help please....thanks
 
Check the wiring to the magneto cover, and the wiring from the battery, to the starter, where the ground is connected. Also check the wire to the coils in the sealed box. Make sure they are tight and not corroded. (Follow the spark plug wires back to the box to locate them)While the mpem,(multi Purpose Electronic Modular) box is open check the condition of all the wires and connections. If it still isn't working post back and we'll go a little further.

Karl
 
Thank you so much for replying .. well I bought the boat on december but I just took it out of the dealer I have a month warranty.. I took it there and they didn't know what to do with it because they are not specialize in seadoos , they send me to a bombardie dealer and they will pay the bill so you can guess what I did.hahaha thanks anyway I will come back here and for sure I will become a member.. talk to you all later
 
That's great news...Keep us posted and if you have any other questions or concerns give us a shout...

Karl
 
Status
Not open for further replies.
Back
Top