• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

97xp running on hose

Status
Not open for further replies.

xp97 787

New Member
My mechanic told me to spray WD40 in my carbs while it was running to solve my problem of bogging. I do not have a hose adapter but am wondering where I should get one and how the whole process works. Also, where do I spray the WD40 in the carbs while the ski is running? what does that process look like?

Any help?
 
That will not fix your problem. You will need to service the carbs and entire fuel system. If you still have gray tempo fuel lines on your ski, they will need to be replaced. You can use black ethanol safe fuel line for cars. It does not need to be high pressure line. You will also need to remove the carbs and at a MINIMUM clean them internally. There are little filters in tehre that are probably dirty as well as more.



If this is you current mechanic, you need to run. There is nothing the world that you could spray into your carbs while running and magically fix your problem.




105.jpg
 
sweet thanks guys!

Also, It took on a little bit of water from a lose hose but not too much. It didn't get to the carbs or spark plugs. The ski started right up but now after the little water it won't start and I've tried choking too. Any thoughts of what it could be?
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top