96 GSX starting problem

[seacrazy62]

I own a 1996 GSX and we have been having a lot of problems with the key and the post it hooks on to. We replaced the post and the key, but we still have no signal. Does anyone know of anything that i could do to fix this problem?

 

[JoeZ]

Per 1996 GSX shop manual:

Engine Start / Stop Switch
Switch condition can be checked with an ohmmeter.
Disconnect the YELLOW / RED wire in the electrical
box. Connect test probes to YELLOW / RED
wire and to ground near solenoid.
Measure resistance, it must be an open circuit
(switch is normally open). Depress and hold
switch, the ohmmeter should read close to 0
ohm.
Safety Lanyard Switch
Disconnect the BLACK and BLACK / YELLOW
wires in the electrical box. Using an ohmmeter,
connect test probes to switch wires.
Measure resistance, it must be close to 0 ohm
when cap is over switch and an open circuit when​

removed.