96 gsx jet pump orings where can i get them

[Nemrod811]

ok so i ve been working on my jet pumps on both my skis and one is missing all the orings.i need the 2 bailer orings that mate to the pump shoe and the water inlet oring that mates the shoe aswell.the smaller orings at the nozzle i found at ace hardware.whoever had the ski before must of lost them cuz they werent there at all.im guessin this is why my bailers arent sucking the water from the hull on the bailer side.im adding a pic from the pump that does have them.its the 2 black ones(bailers)and the white one(water inlet from pump)

edit: i did find them from the dealer but at 7$ each and a 3 hour drive so id like to see if anyone might kno of a cheaper place or some good used ones.ill hold off on spending that as the ski isint running at the moment anyway

[/IMG]

 

[riverdog]

nothing special, if you can, take the assy with you, and match up the o-rings from your local supply hardware store.

 

[Nemrod811]

Those actually have a flange on the end that's y I can't find them

 

[riverdog]

The flange helps the oring stay seated. Nothing special, just an o-ring will do.

 

[Nemrod811]

Oh ok thx that helps alot and thx for posting and reminding me cuz I was 5 miles up the road and forgot the pump and orings to try a match them up had to turn around man Ida been pissed driving an hour and not having them good thing the forum update email caught me just in time

 

[Nemrod811]

[/URL][/IMG]

so heres what i found at ace hardware maybe itll be of some use to someone down the road,i couldnt find a flanged oring for the bailers but reg orings do seem to fit well i just grabbed those from one of those boxes that has diff sizes in them.all the others were on racks but still easy to find.

cone oring #37 p/n 9d0035751b .79 cents each
water inlet 23/32x11/32 stk no. 38808b .79 cents each
bailer orings at the nozzle #41 stk no. 35755b .49 cents each 2 per ski
bailer at hull shoe receipt just says misc fastener 56 .89 cents each 2 per ski

 

[riverdog]

great find, nemrod.

 

[Nemrod811]

Thx, couldn't have done it without your help otherwise Ida kept lookin instead of just using regular orings like u suggested on the bailers.I'm still not done completely tho I'm letting the pumps sit over night to make sure they dnt leak oil before I put them back on