951 millenium ed 2000 no sparks

[aleisra]

Hi, im working in this machine and i have no spark when i trie to start it. Its turns great and the dysplays on the gauge works. I just repair the top of the motor. Can it be the cranposition or mpem?? . All wires chek and ok!!!!
Its 12v send to the ignition coil??? if it so i don't have it. Please help and thanks!!!!
Its works in carbs.
:boxing_smiley:

 

[timmyboy76]

hey aleisra...
Pull the wire from the coil, then try to fire, if it kicks over, than you have problem with mpem board, if not, then possible coil bad or ignition coil on stator bad..

 

[aleisra]

It looks like a i have a bad stator an pickup signal. does a 800 stator fits on the 951 machine???
Thanks for the help!

 

[aleisra]

I just start the engine. I change the pickup because its was giving strange reading. Also got to clean all the stators connectors on the plugs and clean the plug on the computer just because i live in pr and we always run on salt water .... and yes both pickup are the same.Thanks for the help
:hurray:
:cheers:

 

[timmyboy76]

I just start the engine. I change the pickup because its was giving strange reading. Also got to clean all the stators connectors on the plugs and clean the plug on the computer just because i live in pr and we always run on salt water .... and yes both pickup are the same.Thanks for the help
:hurray:
:cheers:

good job, man...:cheers:
Yaeh, from what i have read, difference in electrical is the, besides flywheel, is the magneto cup., Read, where "racers" with 951, dump out those parts, install the 800 flywheel and mag-cup, so then they can toss the "mpem" and run the MSD Enhancer...slick idea, for those that need to replace the $1400 mpem board...