El Toro 33809
Well-Known Member
Can anyone give me a clue as how to tighten the bottom of the 4 "bolts" that connect the exhaust pipe to the exhaust manifold? Three are bolts and the one I am referring to is the bottom one that uses a stud with washer and nut as opposed to the allen bolts on the other three. It is a slide fit to get the exhaust in place, which leads me to believe that the quarters are extremely cramped. I have the exhaust in place, the three bolts tightened, the nut and washer on the stud, but cannot get in place to tighten this last fastener.
We are dealing with a 1999 GTX LTD. It had the grey tempo lines, so my son and I replaced them. He disassembled the unit a while back and we just got some time to work on it this week. He thinks he remembers using a shorty 15mm wrench to disassemble it, but I sure cannot get anywhere near the nut to tighten it.
HELP!!!
We are dealing with a 1999 GTX LTD. It had the grey tempo lines, so my son and I replaced them. He disassembled the unit a while back and we just got some time to work on it this week. He thinks he remembers using a shorty 15mm wrench to disassemble it, but I sure cannot get anywhere near the nut to tighten it.
HELP!!!