Hi All,
sorry this is probsbly a dumb question
Son wants to be a marine engineer so we bought a dead ski to do up.. We're reassembling our 1999 gtx RFI after engine rebuild and we've got a little stumped when plumbing in pipes.
The shop manual shows a different configuration for cooling tubing than the pipes we had installed when ski arrived. The parts manual shows the correct layout for our ski so we're working from that, however embarrassingly there is one port near the flywheel on the throttle /airbox side which we just can't work out where it should be plumbed.
please see photo, its for an 8mm hose
sorry this is probsbly a dumb question
Son wants to be a marine engineer so we bought a dead ski to do up.. We're reassembling our 1999 gtx RFI after engine rebuild and we've got a little stumped when plumbing in pipes.
The shop manual shows a different configuration for cooling tubing than the pipes we had installed when ski arrived. The parts manual shows the correct layout for our ski so we're working from that, however embarrassingly there is one port near the flywheel on the throttle /airbox side which we just can't work out where it should be plumbed.
please see photo, its for an 8mm hose
