587 Pre-Mix

[95spi]

I have read things about the benefits to converting PWC's to premix, and my GP is pre-mix, but lately ive seen a few things about it not being as good of an idea with the Sea-Doo? I have a 95spi with the 587 and am wondering if I should do it, and how to do it.

yes i searched

Thanks

 

[seadooya]

to do it correctly, you'll need the block-off kit, found on ebay. You'll want to remove the intake/RV cover, then remove the front portion of it, to expose the white gear assy, sandwich between the 2-plates, then bolt it back up again. Use the caps from the kit for the brass fittinfgs, and cap for the feed line from the oil tank.

 

[95spi]

Thanks, is this something you reccomend messing with?

 

[seadooya]

personally...no. Ifind myself to be frugal. So anything, that will save money, i'm all for it. But the otherhand, atleast you'll know, that the motor didnt fail because it was not starved for oil.:cheers:

 

[95spi]

Yeah the kits only $12 and i think its worth not having to have two seperate gas cans cause my yamaha is already pre mix