Hi all, the clear plastic cover over the gauge cluster has cracked. I have obtained a replacement cover (front and back), but has anyone had any experience of separating the clear front from the back? It probably needs to be cut apart, but I thought I would ask the question. The gauges themselves are fine. Thanks James
-
This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.
2013 Seadoo GTX 155 S Gauge Cluster Separation
- Thread starter Kiwi64
- Start date
skiasylum
Well-Known Member
Update - I managed to separate the front and back of the cluster by carefully breaking off the black tabs around the base (screen was cracked already) and prying off the clear cover. I didn't have a Dremel tool to cut it away. Transferred the gauges to the new Aliexpress holder and used carmakers butyl tape installed around the bottom of the rear casing (there is a moulded channel for this) and clipped it all back together, ensuring the tape was compressed (watertight). Plugged it back in and all works. Easy job and saved myself hundreds of dollars......................
Similar threads
