Maybe someone can help me. I have a 2008 Speedster 200 with twin 215's. Last week with heavy rain the bilge pump failed and the engine compartment filled with water about half way up the engines. It doesn't look like any water entered the engines or SC's but after draining the water the engines won't start. The battery is good all lights and Acc's work and if I jump the start solenoid the starter's will turn. But when I install the DESS I don't get any lights or beep's, The system is completely dead. I checked all fusses in all 3 interface's (it doesn't look like they were under water) and any hanging fusses I found. I assume the grounds are good or the starters wouldn't turn. I opened any plugs I could reach and all are clean and dry inside. I do have wiring diagrams and I am no stranger to electrical trouble shooting I do it for a living but without a sequence of operation it's hard to follow the electrical path.
hope someone can help
Thanks
hope someone can help
Thanks
Last edited by a moderator:
