2005 Sea Doo gti rfi

[DLatusek12]

I have a stock 2005 gti rfi and they come stock 110 HP which isn't bad at all get's me to 55MPH. Since it's a 3 seater though when you get 2 or 3 of us on their the power obviously cuts big time and I am a TOTAL NOOB with ski engines and know nothing, but I was wondering if there are any simple ways to add some power maybe to just get to 150HP if possible.

thanks guys!

 

[DLatusek12]

Someone has to know something?

 

[DLatusek12]

yaaay no answer yet...

 

[Dr Honda]

First.... Welcome.

Second... there are a few of us from Da' Burgh here. Where are you at?

Third... you got to give it more than 24 Hr's before bumping it. There are only a few guys on this board who look at the performance section.

OK... in regards to your question..... Since you have an injected engine... there is very little you can do to bump the power. If you had a set of carbs... then yes. You could bolt on a pipe, and bore the carbs... and re-jet, and you could get to the 130 hp mark. But, there is very little on the SeaDoo fuel injection, so engine modifications are not recommended, since you can't match fuel to the mods. (sorry)

 

[DLatusek12]

Makes sense I should have looked into that first, thanks for telling me that though, eh oh well 110HP going 55MPH is plenty in a 3 seater for sure.

And I live about 20 miles east of Pittsburgh in an area called New Alexandria, which is close to a Delmont, Murysville area.

 

[Dr Honda]

I know right where you are. I spend most of my water time at Bush recreation aria. (Loyalhana lake) Thats just up from 22, off of 981. (New Alex) I live in Harrison city. between Greensburgh, and Irwin.

DSW222 is down by LiL' Boston.

Im sure Ill see ya around.

FYI... My shop is in Latrobe, in the old Latrobe Diecasting building.

If you need any help... or going out for a ride... give me a yell.

 

[DLatusek12]

I know right where you are. I spend most of my water time at Bush recreation aria. (Loyalhana lake) Thats just up from 22, off of 981. (New Alex) I live in Harrison city. between Greensburgh, and Irwin.

DSW222 is down by LiL' Boston.

Im sure Ill see ya around.

FYI... My shop is in Latrobe, in the old Latrobe Diecasting building.

If you need any help... or going out for a ride... give me a yell.

That's pretty neat actually because Loyalhanna is where we used to do a lot of our riding when we had our bayliner and shall be doing with the Ski. I plan many nice full day trips to Deepcreek and my favorite Raystown!