2001 Seadoo Di

[SCOTTYH2O]

I have a 2001 seadoo gtx di. and this year it seems like it is not getting on top of water like it should. it almost feels like it bogging down until you get on top of water and then it is smooth sailing. and i also notice it when coming out of a 360. Any help would be appreciated

 

[etemplet]

Always check compression if you think you have a problem. That is a great starting point. That and new spark plugs.

 

[SCOTTYH2O]

Alright, thanks i will check compression. I did replace the plugs and still is doing it. but i will get back to you with the compression test. Thanks again!

 

[Tyman2020]

When is the last time your injector and fuel system was service (filters)

 

[SCOTTYH2O]

I changed the fuel filter when i first noticed this issue about 2 months ago. what else should be done to the fuel system?

 

[Tyman2020]

Ive read to get your injectors cleaned and check every offseason have to do all four at once and Thefuelinjectorman is the guy to go to.

 

[Tyman2020]

maybe its every other offseason but im betting they have never been cleaned

 

[SCOTTYH2O]

Good to know that will be my next thing i do i have only had it a year and i bet your correct. Thank you so much!

 

[jhjesse]

I changed the fuel filter when i first noticed this issue about 2 months ago. what else should be done to the fuel system?

Which filter? There are two on the fuel pump in the tank.

 

[SCOTTYH2O]

the external filter was the one i changed.

 

[jhjesse]

the external filter was the one i changed.

I recommend you change those filters as well. Can be purchased at most any auto parts store.
Airtex FS242
Airtex FS220

 

[etemplet]

Give this injector guy in New York a check out. Lots of cool information on his website and things to think about as far as testing is concerned. His name is Jim. Very friendly and helpful and seems to be passionate about his work. Fuel Injector Cleaning and Flow Testing Service. Injector Repair LLC I have not sent him anything yet but I will.

Here is a link to his impressive testing process. Testing Process