2000 Bombardier GTS Piston Oil

[bdraper1235]

Sea doo has excess oil in the cylinders. It cranks fine without plugs, but does not when plugs are in. Attempting to remove oil form the crank case by turning off fuel switch, removing plugs, grounding wires, and cranking engine in 15 second intervals.

Should I be clamping the oil feed line while doing this to prevent more oil from entering the engine? Then reconnect when I attempt to start with the plugs in?

Thanks

 

[mikidymac]

Sounds like you have leaking inner crank seals.

 

[bdraper1235]

It think so too. Planning to install a ball valve on the oil feed line until I fix the real problem.